home *** CD-ROM | disk | FTP | other *** search
-
- start <servers...>
-
- Start the specified server. Do a 'start ?' for a list of
- available servers.
-
- Servers often take an argument which specifies an alternate
- port number from which to listen. Example:
- start callbook [port#] Default port: 1235
- Default port numbers are listed in socket.h.
-
- Exceptions:
-
- start tip iface [modem | terminal] [timeout_secs]
-
- starts a mailbox server which listens for connections on <iface>.
- If <modem> is used, CD (carrier detect) must be asserted before a
- connection is recognized. A <timeout> value specifies how many
- seconds of inactivity must occur before a disconnect is initiated.
-
-
- A tip about using the tip server to provide async dialup access to
- Jnos: the following commands demonstrate one way to set it up.
-
- # source this file to configure COM1 for dialup access to JNOS
- attach asy 0x3f8 4 ax25 dialup 2048 256 9600
- #
- ifconfig dialup descrip "dialup access"
- param dialup up
- # Send any desired config cmds here, eg, answer phone on 1st ring
- comm dialup "atz e0 s0=1"
- pause 2
- #start tip dialup terminal 360
- start tip dialup modem 360
- # If the modem obeys DTR (must be asserted to answer the phone)
- # the modem might be permed with S0=1, and then the answering could
- # be controlled by param dialup up, param dialup down, commands
- # possibly done daily by a repeating at command...
-